Pure Tung Oil.
Intended Use Suitable for use on all types of interior timber.
The surface must be clean, bare and sanded smooth and free of all traces of wax. Pure Tung Oil will bring out the natural colour of wood but if required the colour of the wood may be changed using Rustins Wood Dye. Always carry out test on a small area to assess the colour of the oil. If natural open-grain is not required then use Rustins Grain Filler before oiling.
Using a clean soft cloth or brush apply liberally and allow the oil to penetrate for 20 minutes. Wipe of the excess with a clean soft cloth. The first coat of Rustins Pure Tung Oil can be diluted with 40% white spirit which will further assist penetration into the timber. Do not dilute subsequent coats. Under warm and dry conditions the product should be allowed to dry for 24 hours before further coats are applied. New or bare wood should be oiled 3 times initially but more coats can be applied for extra protection. The oiled surface should be allowed to cure for a few days before use.
Two coats are recommended.
More than 24 hrs in good conditions.
A minimum of 24 hrs in good conditions
Keep out of reach of children. Avoid contact with skin and eyes. No Smoking.
We aim to dispatch your order within 5 to 10 working days. In some instances, due to high demand and timber availability, orders may take up to 15 days for dispatch.
NEXT DAY DELIVERY - please contact us.
Please do not book in a tradesman until you receive and check your items.